MPC NetFRAME 1420 Скачать руководство пользователя | Manualshive

Страница: 20 / 120

background image

MPC Computers, LLC

NetFRAME 1420

20

Safety: Before You Remove the Access Panel

Before removing the access panel for any reason, observe these safety guidelines.

Turn off all peripheral devices connected to the server.

Turn off the server by pressing the power button on the front of the chassis. Then unplug

the AC power cord on the back of the chassis.

Disconnect all peripheral cables and all telecommunication lines connected to the I/O

connectors or ports on the back of the chassis.

Warning: The power button on the front panel DOES NOT turn off the AC
power. To disconnect power from the server, you must unplug the AC power
cord from the wall outlet or the chassis.

Warning: Hazardous electrical conditions may be present on power,
telephone, and communication cables. Turn off the server and disconnect
the power cords, telecommunications systems, networks, and modems
attached to the server before opening the server case. Otherwise, personal
injury or equipment damage can result.

Warning: Hazardous voltage, current, and energy levels are present inside
the power supply. There are no user-serviceable parts inside the power
supply; servicing should be performed by technically qualified personnel.

Caution: For proper cooling and airflow, always install the access panel
before turning the server on. Operating the server without the access panel
in place can damage system parts.

Rack Installation

This section provides information on installing the system into a rack unit. There are a variety of
rack units on the market, which may mean the assembly procedure will differ slightly. The
following is a guideline for installing the system into a rack using the rack rails provided with the
system. Refer to the installation instructions that came with the rack unit you are using.

Rack Installation Safety

Rack Precautions

Installing Inner Rails

Installing Outer Rails

Open Rack Installation

Rack Installation Safety

Your NetFRAME® 1420 chassis comes equipped with a rack mount kit that can be configured for
front-mount, mid-mount, or 4-post racks. An optional slide rail kit may be purchased separately.
Each kit contains instructions for installation into a rack or cabinet. Read the following instructions
prior to installing your server in a rack.

«
...
18
19
20
21
22
...
»

Содержание NetFRAME 1420

























































































































Отзывы:

Нет отзывов

Похожие инструкции для NetFRAME 1420

Бренд: Eaton Страницы: 2

Бренд: NTI Страницы: 35

Бренд: Buffalo Страницы: 2

Бренд: NEC Страницы: 138

Бренд: Huawei Страницы: 39

Бренд: Huawei Страницы: 188

5288 V3 V100R003

Бренд: Huawei Страницы: 297

Бренд: Huawei Страницы: 2

SX-Aurora TSUBASA A300-2

Бренд: NEC Страницы: 30

SX-Aurora TSUBASA A300-4

Бренд: NEC Страницы: 31

Бренд: NEC Страницы: 134

SIGMABLADE AD106a

Бренд: NEC Страницы: 2

Series3800/S120R-2

Бренд: NEC Страницы: 2

Series3800/S120R-1

Бренд: NEC Страницы: 3

Series3800/S110R-1

Бренд: NEC Страницы: 2

ServerCare Express5800/FT

Бренд: NEC Страницы: 14

Бренд: NEC Страницы: 19

NEC Express5800/B120d

Бренд: NEC Страницы: 22

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды