Mountain Models Tantrum
30
3.
Make sure that the bulkhead is perpendicular to the fuselage bottom, and then glue it
in place.
Assembling the Fourth, Fifth and Sixth Bulkheads
The fourth, fifth, and sixth bulkheads can all be assembled at the same time, using
pieces you remove from these balsa sheets:
•
Bulkhead F4 (Figure G)
•
Bulkhead F5 (Figure G)
•
Bulkhead F6 (Figure G)
!
Assembling the bulkheads
1.
Before you begin assembling, you need to flow thin CA around the lightening holes of
the F6 bulkhead. This is to strengthen it so that the Pull-Pull cables do not cut into the
wood.
2.
Position F4, F5, and F6 into the fuselage bottom slots, as shown in the following
picture.
F3 bulkhead
F2 bulkhead
