Mountain Models Tantrum
12
4.
Join both the halves with the provided dowel, gluing it into place with thick CA.
Completely Assembled Elevator
Step 3: Assembling the Ailerons
Once you have finished building the tail feathers, you can begin assembling the ailerons.
Necessary Pieces
•
1- 1/8" laser cut balsa sheet (Figure B)
!
Putting the pieces together
1.
Remove the Aileron 1 pieces shown in black from the balsa sheet.
Aileron 1
2.
Position the pieces, and then begin connecting them together to form an aileron.
Aileron Assembly
3.
Glue all of the joints, following the process described for the horizontal stabilizer.
4.
Once the parts are dry, carefully remove them from the wax paper.
5.
Remove the Aileron 2 pieces shown in black from the balsa sheet.
Aileron 2
Dowel connecting the two
elevator halves together.
