Mountain Models Tantrum
15
Attaching the Rest of the Wing Ribs to the Vertical Spar
For each wing, you will need:
•
3 wing ribs
(Figure E)
•
1 wing rib (Figure G)
The wing ribs are split across two different balsa sheets.
For the second wing you are going to use two ribs from Figure E and one rib from
Figure G.
!
Putting the pieces together
•
While you are still holding the vertical spar with the slots towards the ceiling,
match up each
wing rib slot with the remaining cutouts, and then slide them into
place.
Wing ribs from Figure E
