Mountain Models Tantrum
27
3.
Make sure that the bulkhead is perpendicular to the fuselage bottom, and that the
reinforcement piece is facing to the front, and then glue it in place.
4.
Position the bottom bulkhead reinforcement from Figure G onto the front of bulkhead
F2, matching the curve and sides, and then glue it into place.
5.
Position the bottom bulkhead reinforcement from Figure H on the back of bulkhead F2,
matching the reinforcement’s legs with the fuselage cutout, and then glue it in place.
6.
Position the bottom bulkhead reinforcement from Figure F over the top of the
reinforcement piece you glued on in Step 5, match up the edges, and then glue it into
place.
Bottom bulkhead
reinforcement - Front
Bottom bulkhead
reinforcement - Rear
Bottom bulkhead reinforcement,
on top of previous piece
