Mountain Models Tantrum
38
2.
Form the sheeting over the tops of the bulkheads, lining up the smaller end with the
F7 bulkhead, and the larger end with the F3 bulkhead.
3.
Secure the piece into position using five rubber bands, one at each bulkhead.
4.
Let the sheeting dry completely. Glue the underside of the sheeting where it meets
each bulkhead, and to the outside edges of the fuselage sides.
5.
Once the glue is dry, remove the rubber bands.
Attaching the Cowl Sheeting
The cowl sheeting is exactly like the fuselage sheeting, but it only fits over the cowl
area.
•
Cowl Sheeting (Figure J)
!
Attaching the cowl sheeting
1.
Form the sheeting over the tops of the F1 and F2 bulkheads, lining up the smaller end
with the F1 bulkhead, and the larger end with the F2 bulkhead.
The cowl piece is already attached and sanded here for
reference and positioning purposes only, you should not have this attached to yours
yet.
2.
Secure the piece into position using two rubber bands, one at each bulkhead.
Cowl sheeting
