Motorola MC40 Скачать руководство пользователя страница 30

Страница: 30 / 203

MC40 Integrator Guide

Table 2-1

MC40 Accessories (cont'd.)

Accessory

Part Number

Description

Charging Cup

CUPMC40XX-1000R

Mounts onto the Five Slot Charge Only Cradle Base and
provides MC40 charging slot (Single pack).

Battery Charger
Cup

CUPUNIBTRY-1000R

Mounts on the Five Slot Charge Only Cradle Base and provides
mounting for the Four Slot Battery Charger.

Universal Blank
Slot Cover

CUPUNICVR-5000R

Mounts on the Five Slot Charge Only Cradle and covers a slot
when a cup is not required (5-pack).

SG-MC40-RBOOT-01R

SG-MC40-RBOOT-10R

Provides additional protection for the MC40.

Provides additional protection for the MC40 (10–pack).

Protective
Rubber Boot

SG-MC40-MBOOT-01R

SG-MC40-MBOOT-10R

Provides additional protection for the MC40 with MSR.

Provides additional protection for the MC40 with MSR
(10–pack).

Soft Hip Holster

SG-MC40HLSTR-02R

Mounts on belt and provides storage for the MC40.

Finger Strap

SG-MC40STRAP-01R

SG-MC40STRAP-10R

Mounts on the back of the MC40 and provides secure option
for holding the device (Single pack or 10-pack).

Rack/Wall
Mount Bracket

KT-UNIVLBRKT-01R

Provides for mounting the Five Slot Charge Only Cradle onto a
standard rack or wall.

Mono Corded
Headset

21-UNIV-HDSET1-01R

21-UNIV-HDSET1-10R

Use for PTT and VoIP telephony communications.

Use for PTT and VoIP telephony communications (10–pack).

2.2 Single Slot Charge Only Cradle

The Single Slot Charge Only Cradle provides power for operating and charging the MC40.

Do not connect the micro USB cable from the Single Slot Charge cradle to a host computer USB port.
The cradle cannot charge the MC40 if connected to a host computer.

2.2.1 Single Slot Charge Cradle Setup

Procedure Steps

Plug the micro USB connector into the microUSB port on the cradle.

2-2

MN000112A01 - September 2013

Содержание MC40












































































































































































































Результаты поиска

Содержание MC40

Отзывы:

Motorola MC40, Руководство интегратора, Страница: 30 / 203

Результаты поиска

Содержание MC40

Отзывы: