Motorola MC40 Скачать руководство пользователя страница 189

Страница: 189 / 203

Technical Specifications

The following sections provide technical specification for the device.

11.1 MC40 Technical Specifications

The following table summarizes the MC40’s intended operating environment and technical hardware specifications.

Table 11-1

MC40 Technical Specifications

Item

Description

Physical Characteristics

Dimensions

Height: 143.9 mm (5.66 in.)

Width: 72.8 mm (2.87 in.)

Non-MSR: Depth: 20.1 mm (0.79 in.)

MSR: Depth: 31.8 mm (1.25 in.)

Weight

Non-MSR: 257.7 g (9.09 oz.)

MSR: 266.1 g (9.38 oz.)

Display

4.3 in. capacitive; 480 x 800; 300 nit

Touch Panel

Capacitive dual-touch

Backlight

LED backlight

Battery

Rechargeable Lithium Ion 3.7V, 2680 mAh Smart battery.

Backup Battery

NiMH battery (rechargeable) 15 mAh 3.6 V (not user accessible).

Connectivity

One USB 2.0 OTG connector.

Notification

LED, audio and vibration.

Keypad Options

On-screen keyboard.

Audio

Speakers, microphone and headset connector (mono, 2.5 mm jack with
microphone). Stereo audio through Bluetooth stereo headsets.

Communications

All models: Push-to-Talk. PTT Express Client pre-loaded. VoIP Telephony
Ready models: Optimized for VoIP telephony. VoIP client not included.

Performance Characteristics

CPU

Texas Instruments OMAP 4430 @ 800 MHz, dual-core.

Operating System

Android-based ASOP 4.1.1.

Memory

1 GB RAM, 8 GB Flash.

Output Power (USB)

Docking Connector: 5 VDC @ 500 mA max.

User Environment

MN000112A01 - September 2013

11-1

Содержание MC40












































































































































































































Результаты поиска

Содержание MC40

Отзывы:

Motorola MC40, Руководство интегратора, Страница: 189 / 203

Результаты поиска

Содержание MC40

Отзывы: