Motorola MC40 Скачать руководство пользователя страница 105

Страница: 105 / 203

6.4.2 Adding Packages

Procedure Steps

Click

above the

Users

list box.

Figure 6-2

User Manager Window

In the

Username

text box, enter a user name. The text is case sensitive and required.

In the

Password

text box, enter a password for the user. The text is case sensitive and required.

In the

Retype Password

text box, re-enter the user password.

Select the

Admin

checkbox to set the user to have administrator rights.

Select the

Enabled

checkbox to enable the user.

Click

Repeat steps 1 through 7 for each additional user.

6.4.2 Adding Packages

All system applications that are on the default image are available to all users.

Create a list of installed applications (packages) on the device that are available for use by all the users.

MN000112A01 - September 2013

6-3

Содержание MC40












































































































































































































Результаты поиска

Содержание MC40

Отзывы:

Motorola MC40, Руководство интегратора, Страница: 105 / 203

Результаты поиска

Содержание MC40

Отзывы: