Motorola MC40 Скачать руководство пользователя страница 120

Страница: 120 / 203

MC40 Integrator Guide

6.6.2 Enabling Application Lock

Procedure Steps

Touch

Enable Application Lock

6.6.3 Disabling Application Lock

Procedure Steps

Touch

Disable Application Lock

6.7 Manual File Configuration

Groups File

A Groups file is a text file that provides a list of groups and assigns users to each group.

The text file contains one line for each group. Each line is formatted as follows:

where:

= the name for a group. This is also the name of the White List file for this group. This field

uses any alphanumeric character.

<user1>

through

<userN>

= the name of the user assigned to this group. The user name is the same as that

defined for the MultiUser feature. See

6.5 MultiUser Administrator, page 6-9

for more information.

If the same user is assigned to multiple groups, then that user’s White List will be a logical union of the
White Lists for all of the groups that user is assigned.

A line starting with the # character is considered a comment and is ignored.

6-18

MN000112A01 - September 2013

Содержание MC40












































































































































































































Результаты поиска

Содержание MC40

Отзывы:

Motorola MC40, Руководство интегратора, Страница: 120 / 203

Результаты поиска

Содержание MC40

Отзывы: