© Motor City Wash Works, Inc. 48285 Frank, Wixom Michigan 48393 U.S.A.
Phone: 248.313.0272 ▪ Fax: 248. 313.0271
8MANLWRPCROVR01 09-16-20
www.motorcitywashworks.com
5
Pic #5 Dual Cross Over™ Operating Envelope
Remove
the
WRAP AROUND HUB ASSEMBLIES
from the boxed and the
TWO LEGS
from the main
pallet. Bring to your working area. Using the fork lift, insert the forks on each side of the head assembly
center beam
UNDER THE TOP CROSS BEAM (
as shown in Picture #6). Remove some of the top covers
and secure one of the forks with a
LARGE L or C-CLAMP
(see below).
Pic #6 C-Clamp Locked on Fork Lift
Bring
the head to the installation area. Raise the head assembly and
SECURE THE TWO LEGS TO THE
HEAD FRAME.
Position
the
BACK OF THE DRIVER’S SIDE LEG 45” AWAY FROM THE INSIDE EDGE OF THE
INSIDE GUIDE RAIL
(See Picture #7).
LIFTING POINTS
L or C-CLAMP
