© Motor City Wash Works, Inc. 48285 Frank, Wixom Michigan 48393 U.S.A.
Phone: 248.313.0272 ▪ Fax: 248. 313.0271
8MANLWRPCROVR01 09-16-20
www.motorcitywashworks.com
24
Hydraulic Installation:
Your MCWW CROSS-OVER™
requires a
HYDRAULIC SUPPLY CAPABLE OF 6 GPM @ 1000 PSI
connected to two hoses (one pressure and one return line) located on the
DRIVER’S SIDE of the UNIT
(Picture # 41).
Use the HYDRAULIC SCHEMATIC
shown in Picture #40 as an installation guide.
NOTE:
THE HYDRAULIC SUPPLY CAN BE
CONNECTED TO EITHER SIDE
(DRIVER’S SIDE or PASSENGER’S SIDE) OF THE
CROSS-OVER™ TOP CROSS BEAM BY:
1. DISCONNECTING THE SHORT (36” LONG) HOSE ON THE DRIVER’S SIDE
2. CONNECTING THE “CROSS OVER” HOSE TO THE DRIVER’S SIDE ARM
3. DISCONNECTING THE “CROSS OVER” HOSE FROM THE PASSENGER’S SIDE ARM
4. RECONNECTING THE SHORT (36” LONG) HOSE TO THE PASSENGER SIDE ARM
WARNING
!
DO NOT OPERATE YOUR CROSS-OVER™ WRAP
AROUND UNIT WITH A HYDRAULIC SYSTEM OPERATION AT
A PRESSURE ABOVE 1250 PSI.
OPERATING AT A PRESSURE ABOVE 1250 PSI MAY AFFECT THE
PERFORMANCE OF THE EQUIPMENT AND LEAD TO PREMATURE WEAR OR
MAJOR DAMAGE TO THE CROSS-OVER™ HYDRAULIC SYSTEM OR ITS
COMPONENTS.
Pic #40 Hydraulic Schematic
