© Motor City Wash Works, Inc. 48285 Frank, Wixom Michigan 48393 U.S.A.
Phone: 248.313.0272 ▪ Fax: 248. 313.0271
8MANLWRPCROVR01 09-16-20
www.motorcitywashworks.com
35
Pic 4: Blue Air Line
Connect
the air panel valves to
TWO OUTPUT FUNCTIONS: DRIVER’S SIDE
and
PASSENGER’S SIDE
LICENSE PLATE BUMP-OUT.
You may also choose to connect the valves to the same output as the
driver’s side and passenger’s side mirror bump; the timing of the license plate and the mirror bump being
the same, using the same output may simplify the functions programming.
WARNING!
VERIFY THAT THE VOLTAGE ON THE VALVES IS COMPATIBLE WITH THE
CONTROLLER’S VOLTAGE BEFORE CONNECTING!
Finally,
verify that the secondary arm’s bumper stops are adjusted, allowing the two arms to extend to the
far outward position and the brushes to overlap when fully extended (see picture below).
Pic 5: Adjusts Bumper Stops
NOTE: CHANGING SECONDARY ARM
BUMPER STOP POSITION WILL
CHANGE THE BUMP OUT
OVERALL TRAVEL DIMENSION
BLUE AIR LINE
