E-24 PREPARATION BEFORE STARTING MASS PRODUCTION
<Example>
To carry out test cutting by shifting 0.3 mm in the
radial direction.
a)
Move the cursor to the X-axis data of the wear
offset number of each tool.
b)
For tools used for O.D. cutting, enlarge the
diameter position by 0.3 mm by inputting tool
wear offset data of 0.3.
Input "0.3" using the data entry keys.
c)
Press the
[+ INPUT]
soft-key.
d)
For tools used for I.D. cutting, reduce the
diameter position by 0.3 mm by inputting tool
wear offset data of
−
0.3.
Input "
−
0.3" using the data entry keys.
e)
Press the
[+ INPUT]
soft-key.
Do not input the offset data in the radial
direction for tools such as centering drills and
drills for cutting at the center of a workpiece.
Repeat steps 8) and 9) for all the tools used for
cutting.
10)
Select the memory mode (
) with the mode
selection switch.
11)
Select the turret operation mode by pressing the
head selection switches
(head 1) and
(head 2) simultaneously.
12)
Display the PROGRAM (memory) screen.
13)
Search for the program.
14)
Press the single block switch
to make the
single block function valid.
15)
Press the optional stop switch
to make the
optional stop function valid.
CAUTION
NOTE
MEM
MDI
TAPE
EDIT
H
JOG
RPD
ZRN
1
2
SBK
OSP
BDT
DRN
