E-20 PREPARATION BEFORE STARTING MASS PRODUCTION
2.
Make sure the sign for the entered value is
correct.
3.
If the INPUT key is pressed, the value
having been input with data entry keys is
input for the work shift offset data (Z-axis).
Therefore, make sure to press the
[+ INPUT]
soft-key.
9)
Press the single block switch
to make the
single block function valid.
For items 10) and 11) below, determine whether or
not the corresponding function should be used.
10)
Press the optional stop switch
to make the
optional stop function valid.
11)
Press the dry run switch
to make the dry run
function valid.
12)
Make sure that the rapid traverse rate override,
feedrate override, and spindle override are set
correctly.
13)
If there is an M08 (coolant ON) command in the
program, press the
(CLTOFF) switch for 1
second or more to make the coolant OFF mode
valid.
14)
Select the memory mode (
) with the mode
selection switch.
15)
Select the turret operation mode by pressing the
head selection switches
(head 1) and
(head 2) simultaneously.
16)
Display the PROGRAM (memory) screen, and
search for the program to be used for machining.
17)
With the manual door type machine, press the
DOOR UNLOCK switch
to unlock the front
door. Then open the front door.
With the automatic door type machine, open the
front door by pressing the AUTOMATIC DOOR
OPEN switch.
NOTE
SBK
OSP
BDT
DRN
NOTE
CLTON
CLTOFF
MEM
MDI
TAPE
EDIT
H
JOG
RPD
ZRN
1
2
DOOR
UNLOCK
NOTE
