FOR SAFE OPERATION -9-
SO-NL-B17E/O
7.
Remove any obstacles around the machine.
Secure adequate space around the machine for working and adequate
passageway, considering both ease of operation and safety. If there are any
obstacles or if there is insufficient space or passageway, the operator may trip
and fall or be unable to work properly, and this could causeaccidents involving
serious injuries or damage to the machine.
8.
Stack products (workpieces) stably. If they are not stacked stably they may fall
and injure the machine operator. Unstable stacking may also damage the
products (workpieces), causing defects.
9.
Keep the area around the machine clean; remove chips and foreign matter near
the machine. If left, chips and foreign matter may cause plant personnel to fall
and injure themselves.
10.
Use a working bench strong and stable enough to support the weight of the
workpieces and tools. If an unstable working bench is used the workpieces and
tools could fall off and injure the machine operator.
11.
Do not use cellular phones, electrical welding equipment, or other devices that
generate electromagnetic waves around the machine. If you do so, the machine
may operate in an unexpected manner.
If a machine alarm or NC alarm occurs, check its meaning by referring to the alarm list in
the instruction manual or ladder diagram, and take the appropriate action. If this is
ineffective, consult Mori Seiki or the NC unit manufacturer and take action when you
understand clearly what to do.
CAUTION
NOTE
