MANUAL OPERATION B-23
6)
Set the feedrate to be used for jog feed operation
using the OVERRIDE dial.
For the relationship between the OVERRIDE
dial setting and actual feedrate, refer to page
A-42 (5-11).
When the OVERRIDE dial is placed in the
0
position, the axis is not fed even when an axis
feed switch is pressed.
7)
Press and hold down the axis feed switch for the
axis to be fed.
The axis is fed at a jog feedrate while the switch is
held down.
To stop axis feed, release the switch.
For the C-axis jog feed operation, refer to page
B-53 (12-7). (M type)
100
50
0
150
%
OVERRIDE
NOTE
Z
Z
X
X
