manualshive.com logo in svg

Monroe Electronics DASDEC-II, Руководство пользователя

Поделиться
Скачать
Monroe Electronics DASDEC-II Скачать руководство пользователя страница 31

One-Net/DASDEC User Manual

5-2

v3.0 | r1016

Main/License: Server Name & License Key Configuration

Main/License Sub-Tab Screen

There are two main sections on this screen: Platform ID and License Key Configuration. 

Use this screen to set the Server Name of the device and enable licensed features. 

There are several crucial action buttons at the bottom of the screen to restart, reboot, 

and power off the server.

The first task is to check the License Key configuration. The core device software will 

only run if it has been enabled using a Master license key. Version 3 software is also 

enabled with a valid license key. Most EAS devices are delivered pre-configured in the 

factory, so this task already may be complete. If the device is being upgraded to Version 

3.0, this is the location for inputting that license key.

One-Net R189 or DASDEC II-1EN Platform ID

This is a unique identifier for the actual EAS device hardware, and cannot be edited. 

This identification string is needed to generate a license key to enable an unlicensed 

feature.

Serial ID

Each physical chassis is identified by a unique Serial ID (or Serial Number). This number 

is used when registering the device and for any service calls to track the device. It 

cannot be edited. On the top-right corner of the back panel is a small label that will 

mirror this identifier.

Server Name

The Server Name is the name the EAS device presents through the web interface, is 

included in EAS logs/reports, and is most useful when multiple EAS devices are located 

in the same facility or when centrally managed. When edited, it is best to choose a 

descriptive and unique name for each EAS device, such as 

ROC-HE OneNet

 or 

WMMM 

DASDEC1

. The Server Name c an have spaces and is limited to 70 characters. To change 

the Server Name, click in the Server Name field highlighting the existing text. Type 

the desired Server Name, up to 70 characters, including spaces. When done, click the 

Note

Do not confuse the 

Server Name

 with 

the 

Server Network 

Hostname

 found in 

the 

Setup > Network > 

Configuration

 screen 

(see below). The Server 

Network Hostname 

is how the device is 

identified across the 

house network. The 

Server Name is how the 

device is labeled within 

the web interface.

Содержание DASDEC-II





























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды