Monroe Electronics DASDEC-II Скачать руководство пользователя страница 165

Страница: 165 / 220

One-Net/DASDEC User Manual

5-136

v3.0 | r1016

Configuration

Printer Configuration Screen

There are seven check box options available, check to enable. They are:

Automatic Printer Output upon Alert Decode

When enabled, a report will be printed whenever an EAS alert is decoded.

Automatic Printer Output upon Alert Origination

When enabled, a report will be printed whenever an EAS alert is originated.

Automatic Printer Output upon Alert Forwarding

When enabled, a report will be printed whenever an active decoded EAS alert is for

warded.

Automatic Weekly Printout of EAS Event Report

When enabled, a report will be be printed at midnight on Sunday morning of the previ

ous weeks’ worth of EAS activity.

Automatic Monthly Printout of EAS Event Report

When enabled, a report will be printed at midnight on the morning of the first day of

the month of the previous months’ worth of EAS activity.

Weekly and Monthly EAS Event Report is Categorized

When enabled, this option puts all of the prints in groups by type, and then puts them

in order by date and time. The order is originated alerts, forwarded alerts, and then

decoded alerts.

Send data as Postscript to printer

When enabled, Postscript data will be sent to the default printer.
Use the

Accept Change

button to save changes to this page.

Below the printer options is a system status report about the configured line printer.
When a printer is configured, the expired alert status reports displayed on the

Alert

Events > Incoming, Incoming/Decoded, Forwarded Alerts, Originated/Forwarded

Содержание DASDEC-II





























































































































































































































Результаты поиска

Содержание DASDEC-II

Отзывы:

Бренды по названию

Популярные бренды

Monroe Electronics DASDEC-II, Руководство пользователя

Результаты поиска

Содержание DASDEC-II

Отзывы:

Бренды по названию

Популярные бренды