manualshive.com logo in svg

Monroe Electronics DASDEC-II, Руководство пользователя

Поделиться
Скачать
Monroe Electronics DASDEC-II Скачать руководство пользователя страница 160

One-Net/DASDEC User Manual

5-131

v3.0 | r1016

• 

Momentarily at start of unforwarded, decoded EAS 

X

• 

Pending manual forward of decoded EAS 

X

• 

Pending acknowledgement of unforwarded, active decoded EAS 

X

• 

During EAS alert cued (confirm general origination)

• 

During hold of EAS until GPI closure

• 

During hold of EAS during GPI closure

• 

During Audible parts of segmented live EAS Audio

• 

During audio preview

 

X

• 

During Global Auto-Forward mode enabled

 

X

• 

During Station Auto-Forward mode enabled

 

X

GPIO Output 1 Activation Filter Configuration

Choose the FIPS Group and/or EAS Group that will control which alerts trigger the 

applicable programmed GPIO output 1 relay. Items in the above GPI Output Relay 

pull-down menu list that contain an (

X

) do not offer FIPS Group and/or EAS Group 

filtering.

GPI Output 2 Relay

This pull-down menu allows for programming the GPI Output 2 Relay. Operation of this 

relay is the same as GPI Output 1 Relay above. 

GPIO Output 2 Activation Filter Configurations

Choose the FIPS Group and/or EAS Group that will control which alerts trigger the 

applicable programmed GPIO output 1 relay. Items in the above GPI Output Relay 

pull-down menu list that contain an (

X

) do not offer FIPS and/or EAS Group filtering.

GPIO Pending Alert Activation Filter Configuration

Choose FIPS Group and EAS Group to control which active pending alerts trigger the 

GPIO Output 1 or 2 Relay for states 

Pending manual forward of decoded EAS

 or 

Momentarily at start of unforwarded, decoded EAS

 or to control which alerts are 

forwarded when GPIO Input 1 or 2 is set to 

Forward active decoded EAS upon closure

.

This interface is only present when the GPI Input 1 or 2 is programmed to

 Forward 

active decoded EAS upon closure

, or when the GPIO Output 1 or 2 Relay is set to close

 

Pending manual forward of decoded EAS

. This interface allows the selection of FIPS 

Groups and EAS Groups filtering criteria to be applied to the programmed GPI input 

action or to be applied to an alert that would trigger either GPIO 1 Relay or GPIO 2 

Relay closure. Use this interface to narrow down active alerts that will be forwarded 

upon GPI input contact closure or to narrow which active unforwarded alerts trigger a 

relay closure. To use the interface, select the desired group from the

 FIPS Group 

and/

or

 EAS Group 

pull-down menu. All selections are immediately active once the desired 

group is selected.
The remainder of the GPIO screen provides status displays for:

• 

Expansion GPIO

• 

Multiplayer GPIO

• 

Hub Controller / Net GPIO

Содержание DASDEC-II





























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды