manualshive.com logo in svg

Monroe Electronics DASDEC-II, Руководство пользователя

Поделиться
Скачать
Monroe Electronics DASDEC-II Скачать руководство пользователя страница 194

One-Net/DASDEC User Manual

7-12

v3.0 | r1016

There are two ways to send reconfigured one button test alerts. In both cases, the alert 

is sent immediately with the current clock time as the effective alert start time. No 

confirmation dialog is presented.
1.  Click the button 

Send Preconfigured Weekly Test!

 on the One-Button Alert screen 

2.  Press the front panel button once, wait a second, press it again
3.  Initiating a contact closure on a configured GPIO Input

This screen contains numerous hyperlinks throughout to aide in making configuration 

changes if needed. Some of the more useful hyperlinks are found in the lower right 

corner of the screen: Audio Output Levels, FIPS codes, and Front Panel Button enable.

The 

View alert header and alert translation

 check box and the 

Alert Origination Ac

-

tion

 table operates the same as on the 

General Alerts

 screen.

One-Button Alert: Multistation mode

When in MultiStation mode and at least one station is enabled, the One-Button Alert 

screen displays added options to support individual station origination. See the screen 

shot below.

One-Button Alert – MultiStation Mode

One-Button MultiStation operation allows EAS Required Weekly Tests to be originated 

using a specific subset of controlled hardware in order to play on a specific downstream 

station. In this way, up to five colocated broadcast stations or channels can use one unit 

Содержание DASDEC-II





























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды