One-Net/DASDEC User Manual
5-93
v3.0 | r1016
Time Configuration Notes
•
When configuring the time period, if first time is greater than the second time, the
alert will be scheduled at a random time from 0 hrs. Midnight to second time or
first time to 23:59. If the first time period is less than the second, the alert will be
scheduled at a random time between the first and the second time entry.
•
A random Automatic Weekly test is only scheduled if no weekly tests have been
originated during the current week (Sun-Sat).
•
If changes are made, a previously scheduled weekly test must be manually
cancelled before a new test will be scheduled within the new time frame. Go to
Alert Events > Originated Alerts
to view and/or cancel any scheduled originated
alerts.
Forwarding Settings
Retranslate EAS alert text. Use forwarding station ID and time zone
To retranslate the EAS alert text, check the box. When not checked the decoded
translation will be used.
Use custom ORG text substitution if alert ORG Code is EAS
When checked a text field appears for a custom originator code (ORG). Enter the
desired EAS ORG code.
Simultaneous Station Override (MultiStation Mode)
MultiStation mode option enables one EAS device to provide complete EAS coverage
for up to five co-located stations or program streams with individual station ID’s and
logging. GPIO’s can be set for each stream according to Station ID, FIPS and/or Event
Code. A good portion of the MultiStation specific settings are configured within the
Setup > Station
screens. After the MultiStation license key is installed, the
Main
sub-tab is re-titled
Simultaneous Station Override
and one ‘Station’ sub-tab is added
for each station. A MultiStation 2 will add
Station 1
and
Station 2
sub-tabs while
MultiStation 5 will add
Station 1
,
Station 2
,
Station 3
,
Station 4
, and
Station 5
sub-tabs.
