Monroe Electronics DASDEC-II Скачать руководство пользователя страница 114

Страница: 114 / 220

One-Net/DASDEC User Manual

5-85

v3.0 | r1016

this field and enter a descriptive name for this group of EAS codes.

Choose from All EAS Codes:

This area contains all the EAS codes. It is from this area (and the

Quick Add

but

tons just below) that EAS codes are added to the

EAS codes

list for this group.

Make a selection by clicking on the desired item. Multiple selections can be

made by using the CTRL key when clicking items after the first selection. Both

a mouse scroll (while the mouse hovers over this area) and keyboard up/down

arrows will allow users to scroll the entire list of codes.

Quick Add

Buttons

These five buttons, located just below the

Choose from All EAS Codes

: area, will

quickly add their respective codes to the EAS codes list – foregoing the use of

the the

Add ->

button. The five Quick Add buttons are:

•

Add Emergencies

– contains all emergency related codes

•

Add Warnings

– contains all the warning codes

•

Add Watches

– contains all the watches codes

•

Add Tests

– contains all the test codes

•

Add Advisories

– contains all the advisory codes

EAS Codes

This area displays a list of EAS codes used in the group. Only EAS codes found

in this area will be used for processing wherever this EAS group is selected. EAS

codes are added to this list by selecting the desired codes from the Choose from

All EAS Codes list and clicking the

Add ->

button. Alternatively, clicking the Quick

Add buttons will add the associated codes to this area. Items are removed from

this list by selecting the item(s) and clicking the

Remove Selected

button.

Add ->

Clicking this button will add the selected

Choose from All EAS Codes

to the

Con-

figured Available Encoder EAS codes

list area.

Remove Selection

EAS code can be removed from the

EAS codes

list by selecting the item and

clicking the

Remove Selected

button.

Accept Changes

This button will finalize any additions, edits, and/or deletions made while editing

a EAS code group. Once clicked, the Edit EAS code group section of the interface

will be removed and the screen will return to its normal state.

Cancel Changes

Pressing this button will cancel any changes made to the EAS code group and

return this screen to its normal state.

Configure Available EAS Types for Encoder Alert Origination

The

Send Alerts

tab is where users can configure and send alerts from the EAS

device. A list of EAS codes for available locations where these alerts may be sent

is configured in the lower section of this screen. The interface operates similarly

as the edit EAS code group interface.

Содержание DASDEC-II





























































































































































































































Результаты поиска

Содержание DASDEC-II

Отзывы:

Бренды по названию

Популярные бренды

Monroe Electronics DASDEC-II, Руководство пользователя

Результаты поиска

Содержание DASDEC-II

Отзывы:

Бренды по названию

Популярные бренды