The following EAS Device Setup Worksheet is the first step in configuring your One-Net™ (model R189SE) or
DASDEC II flexible emergency messaging platform. This document will assist in understanding and gathering
the information needed to complete the following worksheet. The worksheet is grouped into three sections
logical sections: Device Information, Network, and Monitoring Assignments.
Print out the following page and write in the information, or fill it out on your computer. Keep a copy for future
reference.
The
Server Name
is the internal name of your EAS device. It is used throughout the web interface, is included
in EAS logs and reports, and is extremely useful when identifying multiple EAS devices within the same facility.
Every EAS device is given a default Server Name that can be modified. If you own multiple EAS devices, it is
recommended to change this name so they can be distinguished from each other. When choosing a Server
Name, make the name as short as possible, descriptive, and unique to this device (for example,
WME DASDEC
or
Monroe HE
, for Monroe Head End).
The
Serial ID
can be found on the rear panel of your EAS device in the top-right corner.
The
Device Location
field is intended for your records, so you can keep track of where multiple devices are
located. This information is not entered into the EAS device.
This section comprises the network-specific information necessary to get connected to the proper computer
network and gain access to the internet. Consult with your network expert or IT department to gather this
information. With the exception of the optional DNS Domain and Search names, all of this information is
required to make your EAS device fully operational. Network connectivity is required to configure, monitor,
and control your EAS device, along with receiving CAP or internet-based alert messages. A static IP Address is
highly recommended for several reasons. An IP Address is entered into a local computer’s web browser to
access the EAS device to configure, control, and monitor the device; a static IP will keep that address constant.
A key component of the EAS device is to receive and decode EAS alert messages via radio transmission. Local
radio broadcasters in your area are responsible to relay EAS alert messages. A list of those broadcasters can be
found in your state's Emergency Alert System plan. The FCC maintains a list of EAS plans and chairs for each
state; click on the provided hyperlink to find your state's EAS plan and your local monitoring assignments.
Typical assignments include a Primary Entry Point (PEP) for national alerts; a Local Primary (LP-1) for state,
regional, and local alerts; and NOAA for local weather alerts.
EAS DEVICE SETUP WORKSHEET
Initial Data Collection
Device Information
Network
Monitoring Assignments
