Monroe Electronics DASDEC-II Скачать руководство пользователя страница 128

Страница: 128 / 220

One-Net/DASDEC User Manual

5-99

v3.0 | r1016

selections can be made using the CTRL key when making selections or they can be

added one at a time.

Current FIPS locations for One-Button DEMO Decode/Forwarding Test

Contains a list of FIPS codes intended for use with the Demo/Practice Warning test.

Each FIPS code has a pull-down menu for subdividing the FIPS location. The default

value is ‘All’. To delete a FIPS code from this list, click the corresponding

Remove

button.

Roll EAS station IDs three times

When checked, will roll EAS station ID three times. Left unchecked, EAS station ID will

roll once.

Preempt an in-progress alert announcement as a test

Check to enable. Make sure blocking during in-progress alert announcements is

disabled to run this test.

When DMO event is forwarded, forward live and bypass criteria (like an EAN, NPT)

Will simulate a national live alert.

EAS Origination (ORG) Codes

Displays a list of available EAS Origination (ORG) Codes. Select one of the codes by

clicking on it. This code will be used with the Demo/Practice EAS message.

Select Alert Audio Message

This selector allows an audio message file to be selected for the audio message portion

of the DMO alert.
Under the Select Alert Audio Message pull-down menu, a hyperlink labeled

To upload

audio files goto Setup Audio Output Levels and Tests

is provided to go to the

Setup >

Audio Output Levels/Tests

screen where users can upload and listen to the available

audio files (See the Audio Setup section of this chapter).
A link labeled

To Run Demo alert goto Decoder Incoming/Decoded Alerts

is provided

to go to the

Incoming/Decoded Alerts

screen within the

Alert Events

tab. Demo/

Practice alerts may be added and forwarded from this location.

NET ALERT SETUP

There are up to six sub-tabs within the

Setup > Net Alerts

page. Valid license keys will

display the appropriate sub-tabs.

Sub-Tab

Description

DVS168

Configuration of a single DVS-168/EARS client for sending EAS

alerts..

EAS NET

Provides a variety of methods to exchange data (including

alert notifications) between EAS devices and other remote

hosts. Includes support for multiple DVS-168 network clients.

This sub-tab replaces the DVS168 sub-tab (above) when

enabled.

Requires valid EAS NET and Encoder license keys

CAP Decode

Enables communication with Common Alerting Protocol (CAP)

servers such as FEMA’s IPAWS.

Requires a valid CAP Plus

license key

Содержание DASDEC-II





























































































































































































































Результаты поиска

Содержание DASDEC-II

Отзывы:

Бренды по названию

Популярные бренды

Monroe Electronics DASDEC-II, Руководство пользователя

Результаты поиска

Содержание DASDEC-II

Отзывы:

Бренды по названию

Популярные бренды