Money Controls Ardac IBA5, Руководство по спецификациям и регулировке

Страница: 36 / 72

Specification and Adjustment Manual - ARDAC IBA5
Document Number 44X501R2 – March 15, 2004
3-8
Figure 3-5A Figure 3-5B
Closing and Locking The Cassette Stacker
While firmly supporting the cassette stacker, use only fingers to move the front edge of the cover from its
open position above the stacker, to its closed position at the top front edge of the stacker. Mishandling of
the stacker cover can cause permanent damage to the cover and hinge. When closing the cassette stacker:
-
DO NOT
close the cover by hitting it against another object such as a table top or chair back.
-
DO NOT
flip the cover closed by holding the cassette handle and snapping the cassette up and inward.
-
DO NOT
close the cover by pushing the open stacker cassette into the System Chassis. The stacker
cassette must be closed completely before insertion into the chassis.
If locks are installed, the keys can be removed only if both locks are in the locked position. Both keys must
be removed before the stacker can be seated in the chassis.
* NOTE: Even though the swing arm of the stacker (Figure 3-5) prevents lid over travel; observe the
precautions outlined above for proper handling of stackers.
Replacement of the Cassette Stacker
To assure proper operation of the IBA5, the stacker cassette must be fully installed and locked into position
before the System is powered up. When inserting the stacker cassette into the chassis refer to the
instructions: Insert Stacker Module Into The Chassis in Section 2, Installation.
Stacker
Swing Arm
Lid