Money Controls Ardac IBA5, Руководство по спецификациям и регулировке

Страница: 14 / 72

Specification and Adjustment Manual - ARDAC IBA5
Document Number 44X501R2 – March 15, 2004
1-9
Connector Description
Refer to Figure 1-4. Power and I/O connections to the system electronics are made through the main system
internal wiring harness (not shown) to a single connector located at the top rear of the chassis. The acceptor
unit makes or breaks all connections when the acceptor is installed or removed from the chassis. The
external wiring harness is permanently mounted to the chassis connector, and provides cabling and
termination for the power supply, and Host I/O or Money Controls Host Simulator connections.
Connector Specifications
Figure 1-5 shows the pin-outs of the main chassis to note acceptor connections. These connectors appear as
viewed from the rear of the acceptor and the rear of the Main Chassis Connector.
Figures 1-5 through 1-9 show the pin-outs of the external harness connectors:
- The 2-pin power supply connector (Figure 1-6) connects the IBA5 to the host or bench power supply.
- The 5-pin host I/O connector (Figure 1-7) passes control signals between the Host and IBA5.
- The 4-pin status monitor connector (Figure 1-8) passes IBA5 system status signals to the Host.
- The 9-pin CAPS connector (Figure 1-9) is not used in NETPLEX applications.
Figure 1-4 NETPLEX Bench Interface