Mobotix MxEasy, Руководство пользователя

Страница: 106 / 132

106
/132
MxEasy User Manual: Advanced Features
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
5.7 Resetting The Cameras From The Privacy Mode
If you choose not to see the generated access data when activating the Privacy Mode
(see Section 3.7, “System Shutoff - Privacy Mode”), you can only deactivate this mode
from the same computer that had been used to activate the Privacy Mode. In case of a
serious malfunction (or total failure) of this computer, you can only activate the system by
resetting all attached cameras to the factory default settings.
Note
You should always try to retrieve the MxEasy Backup folder from the malfunctioning
computer and to copy this folder to the new computer.
Resetting The Cameras To Factory Settings
• Disconnect the power supply for every camera that is attached to MxEasy.
• Restore the power supply and press the
camera button for resetting to factory
defaults
, until you hear the appropriate signal (see Section “Resetting the Camera
to Factory Defaults”, in the corresponding Camera Manual).
Once you have reset all cameras, restart MxEasy. Follow these steps to proceed:
• Add all cameras to the system, which had been attached MxEasy before (see
Section 3.1.1, “Searching MOBOTIX Cameras”).
• Load the automatic backup in MxEasy, if this is available (see Section 4.2, “Saving
And Restoring Settings”). If the backup of the last system start is not available any
more, you will have to set up the cameras manually.