Miyachi Unitek ISA Series, Руководство оператора

Страница: 77 / 122

ISA-4001CR INVERTER POWER SUPPLY
990-364 C-1
APPENDIX C
SYSTEM TIMING
Input and Output Timing Signals
The following illustrations show the timing signals for different functions of the Power Supply.
Start Signal Input
Weld sequence operation varies by the setting of
START SIG. MODE
on the
Mode Select
screen.
Maintained Mode
When the Stage 2 signal is turned off during the weld sequence (between the
Squeeze Delay
time and
Hold
time), the weld sequence is immediately interrupted and there will be no
END
signal output.
Start Signal Input in Maintained Mode