Miyachi Unitek ISA Series, Руководство оператора

Страница: 21 / 122

CHAPTER 1: SYSTEM DESCRIPTION
ISA-4001CR INVERTER POWER SUPPLY
990-364 1-9
Monitor Unit (MA-628A)
The illustration on the right shows the Monitor
Unit. The Monitor Unit allows you to verify the
operation of the Power Supply while it is
operating.
A cable is supplied to connect the Monitor Unit
to the front panel of the Power Supply.
Like the Program Unit, this is an optional unit
that is sold separately. A separate operation
instruction manual is supplied with the Monitor
Unit.
Monitor Unit
Optional Communications Capability
A communications option gives the Power Supply the ability to communicate with a host computer or
with automation control systems. The communications card uses RS-485 multi-drop architecture to
connect up to 30 controls to one host on a single channel.
Using optional Weldlab software, your host computer will be able to connect a single Control or
multiple Controls to a computer in order to compile, store, view, and print weld history data for detailed
analysis, check the status of the Control(s),
remotely program weld schedules on the Control(s), and
remotely program menu items on the Control(s). The codes needed to perform these functions are listed
in
Appendix F, Communications, Section II, Communications Protocol and Commands . Using these
codes, users can write customized software for controlling all functions of the welding control and
operating the Control with automation control systems.