Mitsubishi QJ71E71-100 Series, Руководство пользователя

Страница: 34 / 220

2 - 13 2 - 13
MELSEC-Q
2 USING THE E-MAIL FUNCTION
(a) General settings
Designate the mail setting values that have been registered with the Internet
service provider of the local station's Ethernet module or the mail registration
information designated by the system administrator.
1) Password:
Designate the mail password of the local station's Ethernet module.
2) Mail address:
Designate the mail address of the local station's Ethernet module.
3) Check receive mails:
Select whether or not to check if receive mails have arrived and set the
checking time interval when incoming mails are checked.
When receive mail check is designated, set the time interval for inquiring the
mail server whether or not there are mails addressed to the user.
The following table shows each setting range of the inquiry time intervals for
checking receive mails. (30 s to 24 h)
Time units Setting range (default: 5 min)
h 1 to 24
min 1 to 1440
s 30 to 3600
POINT
If the inquiry time interval from the PLC or other module to the server is short
because of the POP3 server specifications, access may be restricted (lock status)
on the server side.
Check the POP3 server specifications, and set the inquiry time interval accordingly.
(It is recommended to set the setting value of the inquiry time interval to the default
(5 minutes) or more.)
(b) Mail server name
Set the Internet service provider and the domain name or IP addresses of the mail
servers designated by the system administrator, used by the local station's
Ethernet module.
1) Designate the domain name of the mail server.
2) Select the input format (decimal/hexadecimal) of the IP addresses.
3) Set the IP address of the outgoing mail server (SMTP).
4) Set the IP address of the incoming mail server (POP3).
POINT
• The SMTP server delivers (transfers) e-mails between mail servers.
• The POP3 server transfers received e-mails addressed to users to the
corresponding users.
• The mail server names must be designated to use the e-mail function.
(See POINT of (1).)