Mitsubishi QJ71E71-100 Series, Руководство пользователя

Страница: 142 / 220

5 - 25 5 - 25
MELSEC-Q
5 WHEN USING FILE TRANSFER FUNCTIONS (FTP SERVER)
open
[Function] Connects to the FTP server by designating the host name or IP
address for the FTP server, along with the FTP log-in name and
password.
FTP server host name is displayed while connected to the
server.
[Designation format] open HOST NAME [user name [password]]
open IP ADDRESS [user name [password]]
Host name: Host name, domain name or synonym of the host
name
IP address: IP address for Ethernet module (designated within
brackets [ ])
User name: FTP log-in name set during Ethernet module initial
processing
Password : Password set during Ethernet module initial
processing
(See section 5.3 for the FTP log-in name and
password)
[Designation example 1] To connect to the FTP server by designating the host name:
open HOST
[Designation example 2] To connect to the FTP server by designating the IP address:
open [192.0.1.254]
[Designation example 3] To connect to the FTP server by designating the host name and
user name:
open HOST QJ71E71
[Designation example 4] To connect to the FTP server by designating the host name,
user name, and password:
open HOST QJ71E71 QJ71E71
[Caution] • Normally, the connection can be established by designating
the FTP server IP address during FTP startup.
• When designating the domain name, the DNS environment
must be set using the network parameters on the FTP client
side.
• The password entered from the keyboard is not displayed on
the screen.
put
[Function] Writes a file to the QCPU.
[Designation format] put TRANSFER SOURCE FILE PATH [transfer destination
file path name]
[Designation example 1] To write the file MAINSEQ1.QPG to the RAM area of memory
card with same file name:
put MAINSEQ1.QPG 1:\MAINSEQ1.QPG
[Designation example 2] To write the file MAINSEQ.QPG file to the RAM area of memory
card with different file name:
put MAINSEQ.QPG 1:\MAINSEQ1.QPG
[Caution] • When the directory is not designated for the transfer source
file path (FTP client), the file is written to the connected
current directory at FTP server startup connection.
• When the transfer destination file path (FTP server side) is not
designated, the file is stored to the memory where the
parameter file used for the current QCPU operation is stored.
• See sections 5.5 and 5.6.1.