Mitsubishi QJ71E71-100 Series, Руководство пользователя

Страница: 125 / 220

5 - 8 5 - 8
MELSEC-Q
5 WHEN USING FILE TRANSFER FUNCTIONS (FTP SERVER)
(2) Log-in to the Ethernet module
Once the Ethernet module's initial processing has completed normally, log in to
the Ethernet module.
(Example) Start FTP from MS-DOS prompt of Microsoft
®
Windows
®
98
Operating System
1)
2)
3)
4)
1) Start FTP (ftp<ret>).
2) Connect with the FTP server (open IP address of the FTP server <ret>).
3) Designate the log-in name (log-in name (default value: QJ71E71) <ret>).
Designate the password (password (default value: QJ71E71) <ret>).
When logging in, use the FTP log-in name and password set on the "Ethernet
FTP parameter settings" screen for setting the log-in name and password.
Upon receiving the log-in name and password from the external device (FTP
client), the Ethernet module (FTP server) checks whether they match with the
FTP log-in name and password set in the FTP parameter setting area of the
buffer memory.
File transfer to the Ethernet module is allowed when the log-in name and
password match, and not allowed if they do not match.
(3) Remote password unlock
Changes the status of the remote password from lock to unlock if the FTP
communication port has been designated as a port subject to the password check
using the remote password setting. (quote password-unlock remote password <ret>)
POINT
If the FTP communication port has been designated as a port subject to the
password check, other commands cannot be used until the remote password
status is unlocked.