Mitsubishi GOT2000 Series, Руководство по подключению

Страница: 72 / 674

2 - 8
2. DEVICE RANGE THAT CAN BE SET
2.1 MELSEC-Q/QS, Q17nD/M/NC/DR, CRnD-700
2.1 MELSEC-Q/QS, Q17nD/M/NC/DR, CRnD-700
The table below shows the device ranges in [MELSEC-Q/
QS, Q17nD/M/NC/DR, CRnD-700] as the controller type.
*1 Do not set a file register by GT Designer3 when executing
multiple programs with the file of the file register set at [Use
the same file name as the program] by the PLC parameter of
GX Developer.
Otherwise, read/write at GOT will be erroneous.
*2 Available for file register of block No. switched with the RSET
instruction.
*3 Available for file register of block No. of file name switched
with the QDRSET instruction.
*4 Only the intelligent function module on the station connected
to GOT can be specified.
Set within the address range of the buffer memory existing in
the target intelligent function module.
*5 Do not use local devices set in the MELSEC-Q system.
Otherwise, normal monitoring is not performed.
*6 Even though Universal model QCPU processes 64-bit data,
the GOT cannot monitor 64-bit data.
*7 This cannot be monitored when in GOT multi-drop
connection.
*8 For monitoring the internal relay (M) or data register (D) of a
C Controller module, configure the settings related to the
device functions in the device setting tab of the language
controller setting utility.
*9 The device No. must be set in multiples of 16.
(When using the QCPU)
* For details of *1 to *6, refer to 2.2 MELSEC-QnA, MELDAS C6 *.
*7
This is not supported by GT10.
*8 This cannot be monitored when in GOT multi-drop
connection.
(When using the Q Motion)
*9
When setting special internal relay M9000 to M9255, use SM
for the device name and set the value subtracted 9000 for
the device number (0 to 255).
*10 The setting range is D9000 to D9255 when setting the
special data register.
*11 D8192 to D8999 and D9256 to D9999 are out of the valid
setting range.
(When using the QCPU/Q Motion)
*12
Do not use local devices set in the MELSEC-Q (Multi)/Q
Motion system.
Otherwise, normal monitoring is not performed.
Device name
*6
Setting range
Device No.
representation
Bit
d
e
v
ice
Input (X) X0 to X3FFF
Hexadecimal
Output (Y) Y0 to Y3FFF
Internal relay (M)
*5*8
M0 to M61439
Decimal
Latch relay (L) L0 to L32767
Annunciator (F) F0 to F32767
Link relay (B) B0 to B9FFFF Hexadecimal
Timer
*5
Contact (TT) TT0 to TT32767
Decimal
Coil (TC) TC0 to TC32767
Counter
*5
Contact (CT) CT0 to CT32767
Coil (CC) CC0 to CC32767
Special relay (SM) SM0 to SM2255
Retentive
timer
*5
Contact (SS) SS0 to SS32767
Coil (SC) SC0 to SC32767
Step relay (S) S0 to S32767
Link special relay (SB) SB0 to SB7FFF Hexadecimal
Word device bit
Specified bit of the
following word devices
(Except Timer, Counter,
Retentive timer, Index
register and Buffer
memory)
―
W
o
rd
de
vi
ce
Data register (D)
*5*8
D0 to D4910079
Decimal
Special data register (SD) SD0 to SD2255
Link register (W) W0 to W4AEBFF Hexadecimal
Timer (current value) (TN)
*5
TN0 to TN32767
Decimal
Counter (current value)
(CN)
*5
CN0 to CN32767
Retentive timer
(current value) (SN)
*5
SN0 to SN32767
Link special register (SW) SW0 to SW7FFF Hexadecimal
File register (R)
*1*2
R0 to R32767
Decimal
Extension
file register
(ER)
*1
Block 0 to 255
Device ER0 to ER32767
Extension file register
(ZR)
*1*3
ZR0 to ZR4849663
Index register (Z) Z0 to Z19
Buffer memory
(Intelligent function module)
(G)
*4
G0 to G65535
Ww
*7
Ww0 to Ww1FFF
Hexadecimal
Wr
*7
Wr0 to Wr1FFF
Multiple CPU high speed
transmission memory (U3E0)
U3E010000 to U3E024335
Multiple CPU high speed
transmission memory (U3E1)
U3E110000 to U3E124335
Multiple CPU high speed
transmission memory (U3E2)
U3E210000 to U3E224335
Multiple CPU high speed
transmission memory (U3E3)
U3E310000 to U3E324335
Motion device (#) #0 to #12287 Decimal
Bit device word
*9
Converting the above bit
devices into words
(Except Timer, Counter
and Retentive timer)
―