Mitsubishi GOT2000 Series, Руководство по подключению

Страница: 606 / 674

20 - 6
20. FA TRANSPARENT FUNCTION
20.2 Compatible Software
(3) When connecting the GOT and PLC in computer link connection
The following shows the software and the accessible PLC CPUs.
*1 MELSOFT Navigator Version 1.71Z or later is required to use the FA transparent function.
*2 GX Works2 Version 1.497T or later is required to use the FA transparent function.
*3 PX Developer Version 1.40S or later is required to use the FA transparent function.
*4 MX Component that you can use the FA transparent function is scheduled to be supported soon.
*5 The MX Sheet, please use the MX Component (will be supported soon).
*6 GX LogViewer Version 1.32J or later is required to use the FA transparent function.
*7 QnUDVCPU•LCPU Logging Configuration Tool Version 1.32J or later is required to use the FA transparent function.
(4) When connecting the GOT and PLC in Ethernet communication
The following shows the software and the accessible PLC CPUs.
*1 MELSOFT Navigator Version 1.71Z or later is required to use the FA transparent function.
*2 GX Works2 Version 1.497T or later is required to use the FA transparent function.
*3 GX Works2 Version 1.34L or later is required to execute the FA transparent function with using CC-Link IE Field Network Ethernet
adapter (NZ2GF-ETB).
C controller module does not support CC-Link IE Field Network.
*4 MX Component that you can use the FA transparent function is scheduled to be supported soon.
*5 The MX Sheet, please use the MX Component (will be supported soon).
*6 Setting/Monitoring tool for C Controller module Version 4.04E or later is required to use the FA transparent function.(will be
supported soon)
*7 GX LogViewer Version 1.32J or later is required to use the FA transparent function.
*8 QnUDVCPU•LCPU Logging Configuration Tool Version 1.32J or later is required to use the FA transparent function.
*9 Only QCPU can be connected.To connect to QnA/ACPU, connect via QCPU.
*10 MT Developer2 Version 1.66U or later is required to use the FA transparent function.
*11 NC Configurator that you can use the FA transparent function is scheduled to be supported soon.
*12 RT ToolBox2 Version 3.00 or later is required to use the FA transparent function.
*13 Start MR Configurator2 with MT Developer2 Version 1.66U or later.
*14 MR Configurator2 Version 1.23Z or later is required to use the FA transparent function.
*15 A motion controller is required between the GOT and PLC in Ethernet connection.
PLC CPU Software
QCPU (Q mode)
MELSOFT Navigator
*1
GX Works2
*2
PX Developer
*3
MX Component
*4
, MX Sheet
*5
GX LogViewer
*6
QnUDVCPU•LCPU Logging Configuration Tool
*7
LCPU
MELSOFT Navigator
*1
GX Works2
*2
MX Component
*4
, MX Sheet
*5
,
GX LogViewer
*6
QnUDVCPU•LCPU Logging Configuration Tool
*7
Motion controller CPU (Q Series)
MX Component
*4
, MX Sheet
*5
PLC CPU Software
QCPU (Q mode)
*1
, C Controller module
MELSOFT Navigator
*1
GX Works2
*2*3
MX Component
*4
, MX Sheet
*5
Setting/Monitoring tool for C Controller module
*6
GX LogViewer
*7
QnUDVCPU•LCPU Logging Configuration Tool
*8
LCPU
MELSOFT Navigator
*1
GX Works2
*2
MX Component
*4
, MX Sheet
*5
,
GX LogViewer
*7
QnUDVCPU•LCPU Logging Configuration Tool
*8
FXCPU
GX Works2
*2
QCPU (A mode), QnA/ACPU
*1
MX Component
*4
, MX Sheet
*5
Motion controller CPU (Q Series)
MELSOFT Navigator
*1
MT Works2
*10
CNC CPU(Q173NCCPU)
NC Configurator
*11
Robot controller (CRnQ-700, CRnD-700)
RT ToolBox2
*12
MELSERVO(MR-J3-B)
*15
MR Configurator2
*13*14
MELSERVO(MR-J4-B)
*15
MR Configurator2
*13*14