Mitsubishi FB13PNT, Быстрый старт

Страница: 24 / 292

CHAPTER 1 CONTROLLER CHAPTER 1 CONTROLLER
1-12 1-12
2 2..3 3 B Bo oo osstt
2. 2.4 4 Li Limi mita tati tion o on of m f max axim imum um tr trav avel s el spe peed ed
Feature of maximum speed limit Feature of maximum speed limit
When truck traveling is blocked by a step, the boost When truck traveling is blocked by a step, the boost
function prevents stalling of the truck. Usually the motor
function prevents stalling of the truck. Usually the motor
maximum torque is set by SUO #9, and this function allows
maximum torque is set by SUO #9, and this function allows
the truck to go over a
the truck to go over a step regardless of the value setting of step regardless of the value setting of
the motor maximum torque. the motor maximum torque.
Fully depress the accelerator pedal for 2 seconds. The boost Fully depress the accelerator pedal for 2 seconds. The boost
function increases the motor maximum torque for 5
function increases the motor maximum torque for 5
seconds. If the pressure to the accelerator pedal is reduced
seconds. If the pressure to the accelerator pedal is reduced
or the direction lever is moved, the boost function will be
or the direction lever is moved, the boost function will be
cancelled immediately.
cancelled immediately.
500931 500931
* *
* *
To To rque [%] rque [%]
Time [sec Time [sec ] ]
100 100
0 0
7 7
HIGH POWER; Full acceleration HIGH POWER; Full acceleration
STANDARD; Full acceleration STANDARD; Full acceleration
ECONOMY; Full acceleration ECONOMY; Full acceleration
# 9 # 9
2 2
85 85
70 70
Tor Tor que requir que requir ed to ed to
climb over a step climb over a step
Note: When Note: When the motor overheats, the boost will not work. the motor overheats, the boost will not work.
If the stall If the stall time setting is small, the motor protection function will be time setting is small, the motor protection function will be applied during prolonged slow speed traveling. applied during prolonged slow speed traveling.
The speed limi The speed limitation is classified into tation is classified into two major two major types and available to types and available to set each maxim set each maximum speed. um speed.
T Ty yp pe e D De essccrriip pttiio on n
Normal type Normal type
The limitation tha The limitation that functions at all tim t functions at all times and is used t es and is used to keep the o keep the speed within the speed within the limits. limits.
The The
W W
lamp will glow when the lamp will glow when the
W W
switch is pressed switch is pressed
. .
While the While the
W W
lamp is glowing, the speed is lamp is glowing, the speed is
restricted to the speed (km/h) of the display. restricted to the speed (km/h) of the display.
Conditional type Conditional type
The limitation that The limitation that is triggere is triggered from a spec d from a specific switch input oc ific switch input occurrence. currence.
Quadruple input signals are selectable, and available to Quadruple input signals are selectable, and available to set limit value to each set limit value to each signal. signal.
D De essccrriip pttiio on n S SU UO O N No o.. H Ha arrn ne esss s P Piin n N No o..
Normal Normal
Top travel speed Top travel speed limit limit Always effective Always effective #7 #7 --
Turtle SW input Turtle SW input setting setting
Effective when turtle SW is Effective when turtle SW is
enable.
enable.
# #3 30 0, , 3 31 1 --
Travel speed lim Travel speed limit of turtle S it of turtle SW W
Conditional Conditional
Auxiliary travel speed limit 1 Auxiliary travel speed limit 1
Effective when aux. input 1 Effective when aux. input 1
close/open
close/open
# #1 11 1, , 1 12 2 EE--0 03 3--4 40 0
Auxiliary travel speed limit 2 Auxiliary travel speed limit 2
Effective when aux. input 2 Effective when aux. input 2
close/open
close/open
# #1 14 4, , 1 15 5 EE--0 03 3--4 41 1
Auxiliary travel speed limit 3 Auxiliary travel speed limit 3
Effective when aux. input 3 Effective when aux. input 3
close/open
close/open
# #1 17 7, , 1 18 8 EE--0 03 3--3 30 0