Mitsubishi FB13PNT, Быстрый старт

Страница: 172 / 292

2-85 2-85
502260 502260
2 2 6 2 6 2 4 4 - - 2 2 0 1 0 1 8 8 - - 1 1 4 4 - - - - 8 8 - - - - 2 2 3 3 2 2 3 3 0 0 2 2 8 8
CHAPTER 2 TROUBLESHOOTING FOR CONTROL CIRCUITS CHAPTER 2 TROUBLESHOOTING FOR CONTROL CIRCUITS
3.3 3.37 7 Dis Displa play C y Comm ommuni unicat cation ion Fau Fault lt (60 (60))
Error code: 60 Error code: 60
Situation Situation
Display: "60". Display: "60".
N No orrm maal l ttrru ucck k o op pe erraattiio on n A Alll l ttrru ucck k o op pe erraattiio on ns s iin nh hiib biitte ed d
Possible Possible
cause
cause
Faulty main harness, faulty display unit, faulty logic Faulty main harness, faulty display unit, faulty logic
unit.
unit.
Faulty logic unit Faulty logic unit
Trigger of Trigger of
the error the error
code
code
Communication is impossible. Hour meter data Communication is impossible. Hour meter data of of
display unit is abnormal. display unit is abnormal.
Communication is impossible. Communication is impossible.
Checks Checks
(1) Disconnect battery plug, then perform inverter (1) Disconnect battery plug, then perform inverter
discharging work discharging work
(10) Check to see if these are shorted to other signal (10) Check to see if these are shorted to other signal
cables cables
Not Not shorted shorted Shorted Shorted
(14) R i l h (14) R i l h
(12) Replace display unit (12) Replace display unit
(13) Di t b tt l th f i t (13) Di t b tt l th f i t
If fault remains If fault remains
(5) Replace harness (5) Replace harness
(4) Connect E-02 (4) Connect E-02
Measur Measur e resistanc e resistanc e between e between H-0 H-0 3-9 and10 3-9 and10
(harness side) (harness side)
120 120
 
± 5 ± 5
 
Not Not
(7) S (7) S ee troubl ee troubl eshooti eshooti ng for code E ng for code E 65 65
(6) Measure (6) Measure resistance between resistance between H-03-9 and H-03-9 and 10 10
(displace side) (displace side)
120 120   ± 5 ± 5   Not Not
(9) Replace display (9) Replace display
(11) Replace harness (11) Replace harness
CAN CAN
(3) Disconnect connector E-02 and H-03 (3) Disconnect connector E-02 and H-03
Check continuity between E-02-5 and H-03-9(3) Check continuity between E-02-5 and H-03-9(3)
Check continuity between E-02-6 and H-03-10(4) Check continuity between E-02-6 and H-03-10(4)
Continuity Continuity No No continuity continuity
(8) Connect H-03 and disconnect E-02 (8) Connect H-03 and disconnect E-02
Measure res Measure res istance between E istance between E -02-5 -02-5 and 6 and 6
(harness side) (harness side)
60 60
 
± 5 ± 5
 
Not Not
(2) Check connection of display connector (2) Check connection of display connector
" " " "