Mitsubishi FB13PNT, Быстрый старт

Страница: 41 / 292

1-28 1-28
CHAPTER 1 CONTROLLER CHAPTER 1 CONTROLLER
#21 Regen Adjustment for Brake Regen #21 Regen Adjustment for Brake Regen
This works when This works when the brakes are the brakes are applied. applied.
When the setting value is When the setting value is higher than “#23” , higher than “#23” , regenera regenerative power will increase by stepping on tive power will increase by stepping on the brake. the brake.
When the setting value is lower than “#23”, the regenerative rate will be the same as the “#23.” When the setting value is lower than “#23”, the regenerative rate will be the same as the “#23.”
#22 Regen Adjustment for Lever Regen #22 Regen Adjustment for Lever Regen
This setting de This setting defines the “Lever fines the “Lever regen” characte regen” characteristic. ristic.
When the direction lever is shifted into the position opposite to the truck’s traveling direction, the “Lever regen” function is When the direction lever is shifted into the position opposite to the truck’s traveling direction, the “Lever regen” function is
activated. The “Lever regen” characteristic is shown in this diagram. The
activated. The “Lever regen” characteristic is shown in this diagram. The setting range is 1 to setting range is 1 to 10. 10.
500940 500940
100 100
100 100
10 10
1 1
Amount of lever Amount of lever
regeneration regeneration
Level of throttle pedal [%] Level of throttle pedal [%]
(%) (%)
Value of #22 Value of #22
#23 Regen Adjustment for Auto Regen #23 Regen Adjustment for Auto Regen
This This setting setting defines defines amount amount of of deceleration deceleration when when "Auto "Auto
regen" is activated. This setting defines the amount of regen" is activated. This setting defines the amount of
deceleration when “Auto regen” is activated. (Setting "10")
deceleration when “Auto regen” is activated. (Setting "10")
The setting ran The setting range is 1 to 10. ge is 1 to 10.
Note: With Note: With “1” setting, regeneration will not work except “1” setting, regeneration will not work except
when going downhill. when going downhill.
500941 500941
[%] [%]
100 100
Value of #23 Value of #23
Amount of auto regeneration Amount of auto regeneration
10 10 9 9 5 5 2 2 1 1 3 3 4 4 6 6 7 7 8 8
0 0
Deceleration regen Deceleration regen
500942 500942
0 0
#23 #23
10 10 9 9
2 2
Time [s] Time [s]
Truck Truck speed [m/s] speed [m/s]
Deceleration regen Deceleration regen
Note: *When the setting is “1”, Note: *When the setting is “1”, the regener the regenerative braking is ative braking is
not be generated not be generated, thus the time , thus the time for truck to stop is for truck to stop is
spontaneous. spontaneous.