Mitsubishi FB13PNT, Быстрый старт

Страница: 46 / 292

1-33 1-33
CHAPTER 1 CONTROLLER CHAPTER 1 CONTROLLER
#47 Foot Direction #47 Foot Direction
This setting define This setting defines the foot dir s the foot direction contr ection control. ol.
1: Standard direction lever 1: Standard direction lever
2: Foot Direction Control (FoDiCo) 2: Foot Direction Control (FoDiCo)
3: Armrest FNR 3: Armrest FNR
#48 Load Meter Function (E-03-28) #48 Load Meter Function (E-03-28)
Enable or disable the load meter option. Enable or disable the load meter option.
0: Disable 0: Disable
1: Enable
1: Enable
To use this function, an oi To use this function, an oil pressure sensor is r l pressure sensor is required. Units equired. Units
are selectable between KG and LBS from the display. are selectable between KG and LBS from the display.
A different method of calculation is used based on the #44 A different method of calculation is used based on the #44
Mast type. On the truck with 2-FF or 3-FF, when the mast is
Mast type. On the truck with 2-FF or 3-FF, when the mast is
positioned in the first stage, the value displayed on the load
positioned in the first stage, the value displayed on the load
meter is valid, however, when the mast is in the second
meter is valid, however, when the mast is in the second
stage, the load meter does not show the
stage, the load meter does not show the correct value. correct value.
CAUTION CAUTION
The value of the lo The value of the load meter should ad meter should be used as a refere be used as a reference only, as it is calculated fr nce only, as it is calculated from an oil pressure om an oil pressure converted value converted value. Do not . Do not
use this value for calculation of use this value for calculation of the rated load for truck performance. the rated load for truck performance.
#50 #50 Tilt Horizon Function Tilt Horizon Function (E-04-57, E-03-28) (E-04-57, E-03-28)
Enable or disable Enable or disable the tilt the tilt horizon function. horizon function.
0: Disable 0: Disable
1: Enable
1: Enable
To To use use this this function, function, ALS ALS switch, switch, tilt tilt angle angle sensor sensor and and oil oil
pressure sensor are pressure sensor are required. required.
For MC trucks, prepare the output unit and tilt lock valve for For MC trucks, prepare the output unit and tilt lock valve for
this job. this job.
To stop the mast in a horizont To stop the mast in a horizontal position during emp al position during empty load ty load
or when the mast is tilting for or when the mast is tilting forward, press the ALS ward, press the ALS switch. switch.
See the table below for the movement when ALS switch is See the table below for the movement when ALS switch is
pressed.
pressed.
L Lo oa ad de ed d o or r e em mp ptty y T Tiillt t lle ev ve er r o op pe erra attiio on n S Stta attu us s o of f m ma asst t ((a an ng glle e)) M Ma asst t m mo ov ve em me en ntt
Empty load Empty load
B Baacckkw waarrd d ttiilltt FFo orrw waarrd d ttiilltt//b baacckkw waarrd d ttiilltt W Wiilll l b be e ttiilltte ed d b baacckkw waarrd d..
FFo orrw waarrd d ttiilltt B Baacckkw waarrd d ttiilltt W Wiilll l b be e ttiilltte ed d ffo orrw waarrd d..
FFo orrw waarrd d ttiilltt W Wiilll l n no ot t b be e ttiilltte ed d ffo orrw waarrd d..
Loaded Loaded
B Baacckkw waarrd d ttiilltt FFo orrw waarrd d ttiilltt//b baacckkw waarrd d ttiilltt W Wiilll l n no ot t b be e ttiilltte ed d b baacckkw waarrd d. . ((O On n M Mcc
model, will be tilted backward.) model, will be tilted backward.)
FFo orrw waarrd d ttiilltt FFo orrw waarrd d ttiilltt//b baacckkw waarrd d ttiilltt W Wiilll l n no ot t b be e ttiilltte ed d ffo orrw waarrd d..
#51 Tilt Horizon Adjustment #51 Tilt Horizon Adjustment
Tilt angle sensor Tilt angle sensor horizontal value horizontal value setting setting
Zero point should be set Zero point should be set up with the normal tilt angle up with the normal tilt angle kept in horizontal position. kept in horizontal position.
#55 Load Meter Adjustment #55 Load Meter Adjustment
Load meter zero point setting Load meter zero point setting
Zero point setting is also a Zero point setting is also available from the display. vailable from the display.
#-- Tire Adjustment #-- Tire Adjustment
Tire angle se Tire angle sensor straight po nsor straight position setting sition setting
Straight position should be set up. Straight position should be set up.
The zero set The zero set is done at the is done at the moment you moment you press the “<<“ butt press the “<<“ button without pushin on without pushing the “write g the “write” button. ” button.