Mitsubishi FB13PNT, Быстрый старт

Страница: 43 / 292

1-30 1-30
g g g g
CHAPTER 1 CONTROLLER CHAPTER 1 CONTROLLER
#35 Lowering Speed ADJ. #35 Lowering Speed ADJ.
This setting is fo This setting is for adjustment r adjustment of the maximum of the maximum lowering spe lowering speed. ed.
In case the lowering speed is higher than the specification as mentioned in the service manual, it can be adjusted. When In case the lowering speed is higher than the specification as mentioned in the service manual, it can be adjusted. When
lowering the setting, the current to the solenoid will be reduced, but this does not mean it affects the lowering speed
lowering the setting, the current to the solenoid will be reduced, but this does not mean it affects the lowering speed
immediately due to tolerance in oil flow and
immediately due to tolerance in oil flow and oil characteristics. Further lowering of the setting may be required. oil characteristics. Further lowering of the setting may be required.
This setting is applica This setting is applicable to the FC ble to the FC models only. models only.
#39 Pitching Control #39 Pitching Control
This enables the This enables the pitch control that pitch control that suppresses the r suppresses the risk of the carrying isk of the carrying load to fall dow load to fall down or unbalanced. n or unbalanced.
To use this func To use this function, an oil pressure tion, an oil pressure sensor is requir sensor is required. ed.
0: disable, 1: enable 0: disable, 1: enable