manualshive.com logo in svg

Mitsubishi 32172, Руководство пользователя

Поделиться
Скачать
Mitsubishi 32172 Скачать руководство пользователя страница 634

13

13-98

Rev.1.0

(7) Acceptance filtering

When data reception is completed, the CAN module searches for slots sequentially from slot 0 (up

to slot 15) that meet the receive conditions and are therefore eligible for the received message. The

following shows the receive conditions for the slots that have been set to receive a data frame.

[Conditions]

•

 The received frame is a data frame.

•

 The received ID and the slot ID are the same, with the ID mask register bits set to 0 being

   ignored as "Don't care."

•

 The standard and extended frame types are the same.

Note: When in BasicCAN mode, slots 14 and 15 cannot be used as transmit slots.

(8) When the receive conditions are met

When the receive conditions described in (7) above are met, the CAN module sets the CAN

Message Slot Control Register's TRSTAT (transmit/receive status) and TRFIN (transmit/receive

finished) bits to 1 and at the same time writes the received data to the message slot. If the TRFIN

(transmit/receive finished) bit is already 1 at this time, the ML (message lost) bit also is set to 1,

indicating that the message slot has been overwritten. The message slot has all of its ID and DLC

fields overwritten, with an indeterminate value written to its unused area (e.g., the extended ID

field when set for standard frame or an unused data field).

In addition, the time stamp count value at the time of message reception is written along with the

received data to the CAN Message Slot Time stamp Register (CMSLnTSP). When the CAN

module finishes writing to the message slot, it sets the CAN slot interrupt status bit to 1. If the slot

has been enabled for interrupt, it generates an interrupt and waits for the next frame to receive.

Note: If the CAN module receives a data frame before transmitting the remote frame, it stores

the received data frame and does not transmit the remote frame.

(9) When the receive conditions are not met

The CAN module discards the received frame and goes to the next transmit or receive operation.

It does not write to the message slot.

CAN MODULES

13.7  Transmitting Remote Frames

Содержание 32172











































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды