manualshive.com logo in svg

Mitsubishi 32172, Руководство пользователя

Поделиться
Скачать
Mitsubishi 32172 Скачать руководство пользователя страница 418

11

11-2

Rev.1.0

11.1  Outline of the A-D Converters

The 32172/32173 contains two 10-bit resolution A-D converters based on successive

approximation method (A-D0 and A-D1 Converters). The A-D0 Converter has eight channels of

dedicated analog input pins (AD0IN0-AD0IN7) and eight other channels of analog input pins which

are shared with input/output ports or internal peripheral I/O input/output pins (AD0IN8-AD0IN15),

for a total of 16 channels. The A-D1 Converter has four channels of dedicated analog input pins

(AD1IN0-AD1IN3) and 12 other channels of analog input pins which are shared with input/output

ports or internal peripheral I/O input/output pins (AD1IN4-AD1IN15), for a total of 16 channels.
For both converters, the A-D converted value can be read out in either 8 bits or 10 bits.

The A-D converters have the following conversion modes and operation modes.

(1) Conversion modes

•

 A-D conversion mode:

This is an ordinary mode, in which analog input voltages are
A-D converted.

•

 Comparator mode (Note): In this mode, the set comparison voltage and the analog

input voltage are compared to determine which is larger or
smaller than the other (single mode only).

(2) Operation modes

•

 Single mode: The analog input voltage on one channel is A-D converted once or

comparated (note).

•

 Scan mode: Analog input voltages on multiple channels are sequentially A-D

converted.

(3) Types of scan modes

•

 Single-shot scan mode: Scan operation is performed only one cycle.

•

 Continuous scan mode: Scan operation is performed repeatedly until halted.

(4) Special operation modes

•

 Forcibly execute single mode during scan mode operation:

Single mode conversion is forcibly executed during scan operation.

•

 Start scan mode after executing single mode:

Scan operation is started from single mode in succession.

•

 Restart conversion:

A-D convert operation under way is restarted in single or scan mode.

The A-D conversion and comparate speed can be selected from four speeds available: low speed

(normal or twice normal) or high speed (normal or twice normal). Also, an A-D conversion interrupt

request or DMA transfer request can be generated when the A-D conversion, comparate, or single-

shot scan is finished, or each time one cycle of continuous scan mode is finished.

Note: The comparison performed internally by the A-D converter which is of the successive approximation

type and its operation in comparator mode where the A-D converter is used as a comparator are

different. In this manual, therefore, operation in comparator mode is referred to as "comparate" in

order to discriminate it against ordinary comparison.

A-D CONVERTERS

11.1  Outline of the A-D Converters

Содержание 32172











































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды