manualshive.com logo in svg

Mitsubishi 32172, Руководство пользователя

Поделиться
Скачать
Mitsubishi 32172 Скачать руководство пользователя страница 101

4

4-5

Rev.1.0

EIT

4.3  EIT Processing Procedure

When an EIT is accepted, the M32R/E saves the PC and PSW to the stack (described later) and

branches to the EIT vector. The EIT vector has entry addresses assigned for each EIT. This is

where the BRA (branch) instruction (note that these are not branch addresses) for the EIT handler

is written.

In hardware preprocessing by the M32R/E, the contents of the PC and PSW Register are

transferred to the backup registers (BPC Register and the PSW Register BPSW field). This is the

only operation performed here.

Therefore, it is necessary to save to the stack in a user-created EIT handler the BPC Register, the

PSW Register (including the BPSW field), and the general-purpose registers to be used in the EIT

handler. (Remember that these registers must be saved to the stack in a program by the user.)

When processing by the EIT handler is completed, restore the registers from the stack to which

they have been saved and then execute the RTE instruction to return from EIT processing to the

original program (except for System Break Interrupt).

In hardware postprocessing by the M32R/E, the contents of the backup registers (BPC Register

and the PSW Register BPSW field) are restored into the PC and PSW Registers.

Содержание 32172











































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды