Mitsubishi Electric Q80BD-J71GP21-SX, Руководство пользователя

Страница: 191 / 272

14
TROUBLESHOOTING
9
DEVICE MONIT
O
R
UT
IL
ITY
10
MELS
EC D
A
TA
LI
N
K
LI
BRAR
Y
11
PROGRAMMING
12
AP
PLI
C
A
T
IO
N
FUNCT
IONS
13
E
R
ROR COD
E
S
14
TROU
BLE
S
HO
O
T
ING
A
APPE
NDICES
I
INDEX
14.1 Cause Determination Methods for Each Trouble
14
- 3
*1: If only one user account with administrator authority is available, the User Account Control screen
requests the password entry of its user only.
*2: For details on how to prevent this screen from being displayed, refer to Appendix 9.
No. Trouble description Determination method/Action
10
The User Account Control screen is displayed when the utility is activated.
When the utility is activated, and if the
following User Account Control screen is
displayed requesting a selection of user with
administration authority and password
entry
*1
, the user who is logging on to the
system does not have an administrator
authority.
Log off the system and login again as a user
with administrators authority, and activate the
utility.
*2
11 CPU modules other than QCPU cannot be accessed.
CPU modules other than QCPU (Q mode)
cannot be accessed to the 64-bit version of
user application. Use 32-bit version of user
application.
12
Any of the following errors occurred at the completion of the parameter
setting.
• Duplication of station No. and control station setting of the own
station (error code: E508
H
)
• Own station No. duplication error (error code: E509
H
)
• Duplication of the own station's control station setting
(error code: E50AH)
When the operation settings of two or more
boards are changed at the same time, an
error of duplicated station number or
duplicated control number may occur
temporarily.
Reset the board on which any of the errors
described on the left is detected on the Board
detail information screen (

Section 8.3.3).
13
The utility screen is not displayed properly.
The operations of utility cannot be performed.
1) Check if the display settings on the [Device
Manager] or other relevant functions are
correct, and install an appropriate display
driver.
Or update the Windows
®
operating system.
2) Close the other applications.
3) Change the Hardware accelerator setting
of the display setting.
14 The driver does not start up.
1) Install the board.
2) Check if the board is recognized normally
on the "Device Manager" screen
(

Section 14.3.3)
3) When the board is recognized normally
on the Device Manager screen, check if
an error has been occurred on the Event
Viewer screen. (

Section 14.3.2)