Mitsubishi Electric PUHY-P168, Руководство по обслуживанию, Страница: 61 / 404

- 52 -
[
II
Restrictions ]
Wiring method/address setting method
Pro
ce-
du-
res
Unit or controller
Address
setting
range
Setting method Notes
Facto-
ry set-
ting
2 Opera-
tion with
the
M-NET
remote
control-
ler Indoor
unit Main
unit IC 01 to 50
ΠAfter assigning an address to all
indoor units to be controlled
from the MA remote controller,
assign the smallest address to
the main indoor unit in the
group.
ΠIn an R2 system with a sub BC
controller, make the settings for
the indoor units in the following
order.
(i) Indoor unit to be connected
to the main BC controller
(ii) Indoor unit to be connected
to sub BC controller 1
(iii) Indoor unit to be connected
to sub BC controller 2
Make the settings for the indoor
units in the way that the formula
"(i) < (ii) < (iii)" is true.
ΠEnter the indoor unit
group settings on the
system controller
(MELANS).
ΠPort number setting is
required by an R2 sys-
tem.
00
Sub
unit Assign sequential numbers start-
ing with the address of the main
unit in the same group +1. (Main
unit a1, main unit ad-
dress +2, main unit a3,
etc.)
M-NET
re-
mote
con-
troller Main
re-
mote
con-
troller RC 101 to 150 Add 100 to the main unit address
in the group.
ΠIt is not necessary to set
the 100s digit.
ΠTo set the address to
200, set it to 00.
101
Sub
re-
mote
con-
troller RC 151 to 200 Add 150 to the main unit address
in the group.
3 LOSSNAY LC 01 to 50
Assign an arbitrary but unique ad-
dress to each of these units after
assigning an address to all indoor
units. None of these addresses
may overlap any of the in-
door unit addresses.
00
4 Outdoor unit OC 51 to 100 The sum of the smallest address
of the indoor units in the same
system and 50 To set the address to 100,
set it to 50. 00
5 Auxilia-
ry unit BC controller
(main) BC 52 to 100 Outdoor unit a 1
Œ
To set the address to
100, set it to 50.
ΠIf a given address over-
laps any of the address-
es that are assigned to
the outdoor units or to
the sub BC controller,
use a different, unused
address within the set-
ting range.
ΠThe use of a sub BC
controller requires the
connection of a main
BC controller.
00
BC controller
(sub) BS Assign an address that equals the
sum of the smallest address of
the indoor units that are connect-
ed to the sub BC controller and
50.