manualshive.com logo in svg

Mitsubishi Electric PUHY-P168, Руководство по обслуживанию

Mitsubishi Electric PUHY-P168 - Компактный и мощный воздушный кондиционер с функционалом, идеальным для офисов и коммерческих помещений. Получите доступ к сервисному руководству и руководству пользователя бесплатно на manualshive.com. Скачайте их сейчас для успешного обслуживания и эксплуатации вашего устройства.

Поделиться
Скачать
background image

- 101 -

[ 

IV 

 Remote Controller ]

[4] Using the built-in Temperature Sensor on the Remote Controller

1.  Selecting the position of temperature detection (Factory setting: SW1-1 on the controller board on the 

indoor unit is set to OFF.)

To use the built-in sensor on the remote controller, set the SW1-1 on the controller board on the indoor unit to ON.

Œ

Some models of remote controllers are not equipped with a built-in temperature sensor. Use the built-in temperature sen-

sor on the indoor unit instead.

Œ

When using the built-in sensor on the remote controller, install the remote controller where room temperature can be de-

tected.

(2) Automatic mode display selection

*

*

 ON: Clock function is enabled.
 OFF: Clock function is disabled.

*

 

  CALL **** *** ****: The set contact numbers are displayed in an 
                           error situation.

 

[Setting details]
[4] -1. Language selection
The language that appears on the dot display can be selected from among 
the following.

Press the [      MENU] button to change the following setting.
   Japanese (JP),       English (GB),      German (D),      Spanish (E),   
   Russian (RU),       Italian (I),       Chinese (CH),       French (F)

1

2

3

4

5

6

7

8

[4] -2. Function lock
(1) Function lock setting

Press the [      ON/OFF] button to change the following setting.

Press the [      ON/OFF] button to change the following setting.

Press the [      ON/OFF] button to change the following setting.

Press the [      ON/OFF] button to change the following setting.

Press the [      ON/OFF] button to change the following setting.
(Select one of the following.)

Press the [      ON/OFF] button to change the following setting.

Press the [      ON/OFF] button to change the following setting.

Press the [      ON/OFF] button to change the following setting.

Press the [      ON/OFF] button to change the following setting.

Press the [      ON/OFF] button to change the following setting.

no1: All buttons except the  [     ON/OFF] button are locked.
no2: All buttons are locked.
OFF (Initial setting): No buttons are locked.

* To enable locking from the normal display, press and hold the 
[FILTER] and  [    ON/OFF] buttons simultaneously for two seconds 
on the normal display after the above setting is made.

1
2

1

2

3

When the remote controller is connected to a unit with an automatic 
operation mode, the following settings can be made.

 ON (Initial setting)           : Automatic mode is displayed when the 
                                                            operation mode is selected.

OFF

: Automatic mode is not displayed when the 
  operation mode is selected.

(3) Temperature range setting

After this setting is made, the temperature can be changed within the set 

range.

LIMIT TEMP COOL MODE:
The temperature range for the cooling/dry mode can be changed.
LIMIT TEMP HEAT MODE:
The temperature range for the heating mode can be changed.
LIMIT TEMP AUTO MODE:
The temperature range for the automatic mode can be changed.
OFF (Initial setting): The temperature range is not set.

1

2

3

4

When any setting other than OFF is selected, the temperature range 
setting for cooling, heating, and automatic mode is also made. The range 
setting will not take effect if the temperature range has not been set.
To increase or decrease the temperature, press the [      TEMP (     ) or (     )] 
button.
To switch between the upper limit setting and the lower limit setting, press 
the         button. The selected setting will flash, allowing the temperature to 
be set.
Settable range
Cooling/Dry mode   Lower limit: 19 C ~ 30 C [67 F ~ 87 F]     
                                Upper limit: 30 C ~ 19 C [87 F ~ 67 F]  
Heating mode          Lower limit: 17 C ~ 28 C [63 F ~ 83 F]  
                                Upper limit: 28 C ~ 17 C [83 F ~ 63 F]  
Automatic mode      Lower limit: 19 C ~ 28 C [67 F ~ 83 F]  
                                Upper limit: 28 C ~ 19 C [83 F ~ 67 F]  
The settable range varies depending on the unit to be connected.
(Mr. Slim units, Free-plan units, and medium temperature range units)

(2) Clock enable/disable function

(3) Timer function setting

WEEKLY TIMER (Initial setting): Weekly timer function is enabled

Auto off timer function is enabled

AUTO OFF TIMER:

Simple timer function is enabled.

SIMPLE TIMER:

Timer function is disabled.

TIMER MODE OFF:

1
2

1

2

3
4

When the clock setting is set to OFF, the   WEEKLY TIMER   is 
disabled.

(4) Technical assistance contact number setting

CALL OFF: The set contact numbers are not displayed in an error 
                       situation.

CALL_: Contact numbers can be entered when the display 

          appears as shown on the left.

Setting the contact numbers

To set the contact numbers, follow the following procedures.
Move the flashing cursor to set the numbers. Press the [     TEMP. (    ) 
or (    )] button to move the cursor right (left). 
Press the [      CLOCK(    ) or (    )] button to set the numbers.

[4] -4. Display mode change 
(1) Temperature unit selection

 C (Initial setting): Temperature is displayed in   C.
 F: Temperature is displayed in  F.

(2) Suction air temperature display setting

ON: Either      COOL   or      HEAT   is displayed during
        automatic mode.   
OFF: Only      AUTO   is displayed during automatic mode.

[4] -3. Mode selection

(1) Remote controller main/sub setting

 Main: Designates the controller as the main controller.
 Sub: Designates the controller as the sub controller.

1
2

1
2

1

2

1

2

1

2

ON: Suction air temperature is displayed. 
OFF: Suction air temperature is not displayed.

(3) Automatic cooling/heating display setting

Содержание PUHY-P168





















































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для PUHY-P168

Daikin REYQ72XATJU Operation Manual preview
REYQ72XATJU
Бренд: Daikin Страницы: 19
Toyotomi ETK-20E Instruction Manual preview
ETK-20E
Бренд: Toyotomi Страницы: 38
Armstrong Air 4SCU 16LS Series Installation And Maintenance Instructions Manual preview
4SCU 16LS Series
Бренд: Armstrong Air Страницы: 32
camry Premium CR 7926 User Manual preview
Premium CR 7926
Бренд: camry Страницы: 156
nedis COOL113CWTP Quick Start Manual preview
COOL113CWTP
Бренд: nedis Страницы: 16
Daikin FDMA71AV16 Installation Manual preview
FDMA71AV16
Бренд: Daikin Страницы: 57
Daikin FT25/35G Brochure & Specs preview
FT25/35G
Бренд: Daikin Страницы: 6
Technibel MPAF188C5TAA Technical Data & Service Manual preview
MPAF188C5TAA
Бренд: Technibel Страницы: 34
dirna Bergstrom bycool green line LITE Mounting Instructions preview
bycool green line LITE
Бренд: dirna Bergstrom Страницы: 64
420Purifier 420 box Intended Use preview
420 box
Бренд: 420Purifier Страницы: 2
ALPATEC R 520 WT (French) Mode D'Emploi preview
R 520 WT
Бренд: ALPATEC Страницы: 8
REMEZA RFD 1000 Instruction Manual preview
RFD 1000
Бренд: REMEZA Страницы: 29
Champion ESSICK N46W User Manual preview
ESSICK N46W
Бренд: Champion Страницы: 12
Sonnenkonig 10200901 Manual preview
10200901
Бренд: Sonnenkonig Страницы: 36
Lennox PureAir PCO-12C-2 Installation And Maintenance Instructions Manual preview
PureAir PCO-12C-2
Бренд: Lennox Страницы: 8
Gibson GAH126R2T - GIBSON 12000BTU 230V 6.0A 9.0E3 SPD 4 WAY AIR DIRECTION Factory Parts Catalog preview
GAH126R2T - GIBSON 12000BTU 230V 6.0A 9.0E3 SPD 4 WAY AIR DIRECTION
Бренд: Gibson Страницы: 4
Friedrich QuietMaster SL25 Operating Manual preview
QuietMaster SL25
Бренд: Friedrich Страницы: 24
Friedrich ZoneAire Compact P08SA Owner'S Manual preview
ZoneAire Compact P08SA
Бренд: Friedrich Страницы: 32

Бренды по названию

Популярные бренды

Загрузить еще бренды