Mitsubishi Electric PUHY-P168, Руководство по обслуживанию

Страница: 256 / 404

- 247 -
[
IX
Troubleshooting ]
Refer to section -8-"Inverter " under part [4] "Trouble shooting principal parts" for error codes related to the inverter.
4220
4225 Bus voltage
drop
(Detail code
108) If Vdc 150V or less is de-
tected during Inverter op-
eration. (S/W detection) (1) Power supply environment
Check whether the unit makes an instanta-
neous stop when the detection result is ab-
normal or a power failure occurs.
Check whether the power voltage is 150V or
less across all phases.
(2) Voltage drop detected In the case of 4220
Measure voltages of the male
connector (CNDC2) on the
compressor INV board.
-> Replace the INV board when
there is no voltage drop.
-> Check the followings when
there is a voltage drop.
1) Check the voltage of CN52C1 on
the main board.
Refer to (3).
2) Check whether 52C1 works normally
Refer to (4).
Or check 52C1 connecting piping.
3) Check for the diode stack.
Refer to (5).
4) Check for the wiring and the con-
nectors between the CNDC2-G
on the compressor INV board
and the CNDC1 on the G/A
board.
Replace G/A board when no fault is
found for the above (1) - (4).
In the case of 4225
Check the following.
1) Check the voltage of CN52C1 on the
main board.
Refer to (3).
2) Check whether 52C1 works normally
Refer to (4).
Or check 52C1 wire connection.
3) Check for diode stack failure.
Refer to (5).
4) Check the wiring and the connectors of
the CNVDC on the FAN INV board.
Replace FAN INV board when no
fault is found for the above (1) - (4).
(3) Main board failure
Check whether AC208/230V is applied to
the male connector (CN52C1) on the main
board during inverter operation.
->If not applied, check the main board
and the fuse (F01 andF02).
Replace the main board when no
fault is found.
(4) 52C1 failure Refer to 9 [4]-8-(4) and check the
coil resistance check.
(5) Diode stack failure Refer to 9 [4]-8-(6) and check the di-
ode stack resistance.
Bus voltage rise
(Detail code 109)
If Vdc 425V or more is
detected during inverter
operation.
(1) Different voltage connection Check the power supply voltage on the pow-
er supply terminal block (TB1).
(2) INV board failure Replace the INV board when no fault is
found.
In the case of 4220: Compressor INV board
In the case of 4225: FAN INV board
Abnormal VDC
(Detail code 110) Bus voltage abnormality If Vdc
400V or more or Vdc 160V or
less is detected. (H/W detec-
tion) Same as detail code No.108
and 109 of 4220 error Same as detail code No.108 and
109 of 4220 error.
Error Code
Error definition and error
detection method
Cause Check method and remedy