Mitsubishi Electric F930GOT-BWD, Руководство по эксплуатации

Страница: 53 / 342

Graphic Operation Terminal GOT-F900 Start up 7
7-9
7.3 Each mode selection procedure
[ SELECT MODE ] END
USER SCREEN MODE
ALARM MODE
HPP MODE
SAMPLING MODE
TEST MODE
OTHER MODE
MODE SELECT MENU SCREEN
Production control
Number of products
Operation rate
1234
[ HPP MODE ] END
PROGRAM LIST
PARAMETER
[ SUMPLING MODE ] END
SET CONDITION
DISPLAY LIST
[ ALARM MODE ] END
DISPLAY STATUS
DISPLAY HISTORY
USER SCREEN MODE
HPP MODE
SUMPLING MODE
ALARM MODE
• If "MAIN MENU CALL KEY" has been set in
"SET-UP MODE", when a specified touch key is
pressed, the SELECT MODE screen shown on
the left is displayed.
• The outline of each mode and the selection
procedure are described below.
• USER SCREEN MODE (Refer to
Sections 9.)
A user screen is displayed.
Characters such as standard text,
numerics, Katakana and Kanji and
simple graphic can be displayed.
• HPP MODE (Refer to Section 10.)
List programs can be read/written/
monitored, and bit devices and
word devices in the PLC can be
monitored.
Set values of T, C and D can be
changed.
• SAMPLING MODE
(Refer to Section 11.)
The current value of specified data
is acquired in a constant cycle or
w h e n t h e t r i g g e r c o n d i t i o n i s
satisfied.
• ALARM MODE
(Refer to Section 12.)
Bit devices are monitored as alarm
e l e m e n t s . W h e n a b i t d ev i c e
becomes ON, a corresponding
message is displayed.