Mitsubishi Electric F930GOT-BWD, Руководство по эксплуатации

Страница: 166 / 342

Graphic Operation Terminal GOT-F900 Other Mode 14
14-2
14.2 SET TIME SWITCH
Set the time switch using the clock function built in to the GOT.
This function turns ON up to 8 consecutive bit devices during a set time when a specified day
of the week and time have come.
Target bit devices can be specified using FX-PCS-DU/WIN-E.
(In the case of GT Designer, this function is available for SW4D5C-GOTR-PACK(A) or later.)
u
u u
u
Basic operation
Day of the week : Select desired days of the week by pressing them."
l
" is added to selected
days of the week.
When a day of the week marked with "
l
" is pressed again, selection is
canceled.
START TIME : Set the time at which the specified bit devices turns ON. The devices will
remain ON from the start time to the end time on the selected days of the
week.
END TIME : If the end time is earlier than the start time, the specified bit devices remain
ON until the following day (even if the following day is not selected).
a) Target bit devices
Specify up to 8 consecutive devices.
• In the setting on screen 2, (CH1) M100 will remain ON from 10h 11m 12s to 10h 12m
12s on Monday to Friday.
OTHER MODE
screen is displayed. Channel setting
screen is displayed.
CH1 to CH8
Paragraph 7.3
Select channels
(= bit devices)
1 to 8 to be set.
SET TIME SWITCH
Select "SET TIME
SWITCH".
Screen 1 Screen 2
[ SET TIME SWITCH ] END
[ CHANNEL ]
SUN
Screen2
CH1:
START TIME
10h 11m 12s
10h 12m 12s
END TIME
MON TUE WED THU FRI SAT
5
0 6
1
2 3 4
7 8 9 - CLR
ENT
CH4 CH8
[ SET TIME SWITCH ] END
CH1 a)
[ OTHER MODE
MENU ]
CH2
CH3
CH5
CH6
CH7
< Example >
Screen1