Mitsubishi Electric F930GOT-BWD, Руководство по эксплуатации

Страница: 285 / 342

Graphic Operation Terminal GOT-F900 Creation of Display Screen (GT Designer) 20
20-11
20.5 Data display function
The ON/OFF status of bit devices in the PLC and the current value of word devices in the PLC
can be displayed.
20.5.1 Display of numerics
The "Numerical Display" object displays the data of word devices in the PLC in the form of
numeric.
u
u u
u
Contents of setting
1) Number of digits
• Maximum allowable number of digits: 12 (Minus sign (-) and decimal point are counted
as 1 digit each.)
Number of digits after decimal point
• Enter the number of digits after a decimal point for a case where a decimal point is
displayed.
Example: When the displayed numeric is "2000"
2000: Number of digits after decimal point = 0
200.0: Number of digits after decimal point = 1
20.00: Number of digits after decimal point = 2
2.000: Number of digits after decimal point = 3
2) Style
• Select one style from decimal with sign, decimal without sign, hexadecimal, octal, binary
and real (Binary float value).
• Zero suppression
When the zero suppression function is not used, "0" is displayed in each blank digit
position to the left of the data. The number of "0’s” displayed will depend on the specified
total number of digits.
Example:
When the total number of digits is set to 7 and the number of digits after decimal point is
set to 2
00012.34:"0" is displayed in these digits.
• A numeric is displayed horizontally.
High-speed counter
-2147483648
C235 (32 bits)
11 digits 10 digits
If data whose number of digits exceeds the maximum allowable
number of digits is specified to be displayed, "?" is displayed.
to
2147483648